Three-phase 20A thyristor controller It integrates power and voltage regulation. Adopting imported components and high-precision digital circuit control, three-phase 20A thyristor controller has a longer service life and is safe and reliable. With digital display, three-phase 20A thyristor controller is more convenient to modify control parameters locally. three-phase 20A thyristor controller supports multiple input signals and has soft start and soft stop functions. Optional features include 2-channel Modbus RTU communication, optional true RMS voltage and current display, optional DA analog output function; single-phase models come standard with two DOs.
Three-phase 20A thyristor controller is widely used in scenarios such as lighting adjustment in stages and KTVs, speed regulation of single-phase motors, and heating power control.
Features
Intelligent integrated voltage and power regulation technology, integrating variable-cycle and fixed-cycle zero-crossing control.
PLC transistor output can directly drive and control.
Intelligent dual Modbus online distribution control.
True RMS voltage, current and power measurement and transmission functions.
Signal Control Methods
Automatic Control: Standard signal inputs including 4-20mA, 0-10mA, 0-5V, 0-10V, 1-5V, 2-10V, and PWM.
Manual Control: 10K potentiometer adjustment; panel button adjustment.
Control Method
Integrated technology of voltage regulation phase-shifting and zero-crossing cycle power regulation, capable of achieving closed-loop control such as constant current, constant voltage, and constant power.
Load
Applicable Load Types
Various pure resistive loads, various inductive loads, IR infrared lamps and other loads; various DC power supplies, electrolysis power supplies, electroplating power supplies.
Load Voltage
110V, 220V, 380V, 440V, 690V, etc.
Control Voltage
100~245V adaptive voltage.
Load Frequency
50Hz/60Hz.
Soft Start/Soft Stop
Configurable range: 0-400 seconds.
Protection System
Electronic overvoltage and overcurrent protection; overtemperature protection.
Built-in fast-acting fuse.
Analog Output Signals
0-10V, 0-5V, 2-10V, 1-5V
0-20mA, 4-20mA
DO Output Signals
2 channels.
Alarm Output Signals
Normally open and normally closed.
Communication
Optional 2-channel standard MODBUS RTU communication.
Cooling Method
Air cooling.
Other Detailed Parameters
| Input Impedance | 120Ω (for 4-20mA input mode) |
| Soft Start Time Range | Adjustable range of 0-400 seconds |
| Output Voltage Control Range | 0.0-0.98 of the input voltage |
| Adjustment Output Resolution | 0.2° |
| Protection Action Time | < 20ms |
| Relay Contact Rating | 250V AC 2A |
| External Voltage Control Function | Voltage adjustment (internal) / 0.00-1.00 |
| Insulation Resistance | 20 MΩ at 500V DC |
| Dielectric Strength | 2000V AC for 1 minute (for 220V models); 2500V AC for 1 minute (for 380V models) |
| Current Limiting Function | Adjustment range of 0.20-1.10 |
| Overcurrent Protection System | Electronic-type protection;Schematic Diagram for Model Selection & Dimensions |
| Length × Width × Height | 155mm × 81mm × 131mm |
Hot Tags: three-phase 20a thyristor controller, China three-phase 20a thyristor controller manufacturers, suppliers, factory, 1PH 690V Thyristor Controller, power regulator, Ethernet Communication Controllable Silicon Power Controller, Three phase Thyristor Voltage Regulator, 1PH Thyristor Rectifier Controller, Three phase Two wire Thyristor Power Regulator

