0-5V Dual-Channel Voltage Isolation Transmitters

0-5V Dual-Channel Voltage Isolation Transmitters

This product features high measurement accuracy with no exaggerated technical specifications. The input is measured using a 20-bit AD converter, and the transmission output adopts 16-bit transmission. The isolation voltage of this product is 2000V.
Send Inquiry
Description

This product features high measurement accuracy with no exaggerated technical specifications. The input is measured using a 20-bit AD converter, and the transmission output adopts 16-bit transmission. The isolation voltage of this product is 2000V.

 

Features

 

 

Compatible with 3-wire input;
Transmission accuracy higher than 0.001;
Low temperature drift with a precise voltage source design;
Data conversion accuracy: 20-bit AD resolution;
One-input-to-two-output configuration supporting different output types;

Input

0-1V, 0-5V, 0-10V, ±1V, ±5V, ±10V, 1-5V, 2-10V

 

Output

0-5V, 1-5V, 0-10V, 2-10V, 0-10mA, 0-20mA, 4-20mA

 

Alarm

Below the lower range limit

Above the upper range limit

Thermocouple breakage

The indicator light flashes for alarm.

 

 

Other Detailed Parameters

 

 

Parameter Category Specific Parameters
AD Accuracy 20-bit
Input Impedance >300KΩ
Power Supply Voltage/Current 24V / 25mA
DA Accuracy 16-bit
Output Voltage/Load Resistance 0-5V, 1-5V / RL > 120KΩ
Output Current/Load Resistance 0-20mA, 4-20mA / RL ≤ 650Ω
Power Supply Voltage DC 24V (±10%) (Note
Power Supply Protection Reverse polarity protection and ESD protection
Power Consumption <2.7W (when powered by 24V, with 20mA output)
Measurement Accuracy (20℃) 0.001 FS
Temperature Drift (0℃~50℃) 50PPM/℃
Dielectric Strength 2000V AC for 1 minute (between input, output, and power supply)
Electromagnetic Compatibility IEC61326-1
Operating Ambient Temperature -20℃~50℃
Applicable On-site Equipment Voltage-type signal input devices and 3-wire voltage-type sensors
Model Selection & Dimensions Dimensions (Width × Height × Depth): 17.5mm × 99mm × 114.5mm
Model Selection Example For example: If 1 channel of 0-5V input, 1 channel of 0-10mA output, and output upper limit when input is open-circuited are required,
the model code is:
DK3050-IN:0V5-OUT:0MA10-AM:1

 

Hot Tags: 0-5v dual-channel voltage isolation transmitters, China 0-5v dual-channel voltage isolation transmitters manufacturers, suppliers, factory, 0 10ma Dual Channel Analog Signal Transmitter, 0 400 Signal Isolation and Transmission Equipment, 0 5V Dual Channel Voltage Isolation Transmitters, 4 20ma Analog Input Isolated Transmitter, High Precision Thermocouple Signal Isolation Transmitter, Innovative Passive 4 20mA Transmitter