Industrial-Grade Intelligent Control Instrument for Furnaces is a single-loop process control and display instrument based on microprocessor technology. Industrial-Grade Intelligent Control Instrument for Furnaces can control and display process parameters such as temperature, pressure, and flow. The instrument features flexible settings, convenient configuration, and simple operation.Supplementary Explanation of Industrial Terminology
Detailed Parameters
| Input Signal Range | 23 common industrial standard signals |
| Basic Error | 0.002FS±1 digit |
| Measurement AD | 24-bit, 40Hz |
| Output DA | 12-bit, 100KSPS |
| Main Control Output | 1 channel (heating/cooling output mode optional; the third alarm can be defined as cooling output) |
| Input Impedance | ≥500KΩ for voltage signals, ≤200Ω for current signals, ≤0.25mA for thermal resistors, ≥500KΩ for thermocouples |
| Output Impedance (Load Capacity) | ≤500Ω for current output (can be 650Ω for special current requirements, please specify when ordering); Relay output |
| Display Method | Nixie tube |
| Control Output Cycle | 10Hz |
| Communication Protocol | MODBUS RTU (RS485 interface, 2-wire system) |
| Transmission Distance | 1200 meters |
| Parity Check | None, odd, even |
| Baud Rate | 4800, 9600, 19200 |
| Communication Data Format | 1 start bit, 8 data bits, 1 stop bit |
| Power Supply Voltage | 100-240V AC (47~63Hz) |
| Isolation Voltage | Isolation between input, output and power supply; 2300V AC for 1 minute |
| Operating Conditions | Temperature -20℃～+50℃, Humidity 0.1-0.9 |
| Storage Conditions | Temperature -40℃～+80℃; Humidity 0.1-0.9 |
Product Features
High-precision 24-bit AD measurement with sensor power supply
4-channel alarm relay output control available
Standard MODBUS RTU communication
With signal transmission function
Capable of heating and cooling dual-output control (cooling uses relay, which can protect the cooling compressor)
Custom anti-interference chip-designed measurement circuit, operable in harsh working environments
Improved DK PID algorithm control for faster output and no overshoot; Control speed: 100ms
Model Selection & Dimensions
DK2308L: External Dimension 48×96×136.5mm, Cutout Dimension 44×92mm
Hot Tags: industrial-grade intelligent control instrument for furnaces, China industrial-grade intelligent control instrument for furnaces manufacturers, suppliers, factory, Color LCD Display Temperature Controller, Constant Temperature PID Temperature Controller, Dual Loop Pid Temperature Controller, Heater Break Protection Temperature Controller, Intelligent Temperature Controller Supports MODBUS RTU, Thermal Resistance Input Temperature Controller
