50-Segment Programming Multi-Functional Process Controller features dual communication functions and supports Ethernet. 50-Segment Programming Multi-Functional Process Controller boasts high measurement and control accuracy, and is compatible with input of 47 types of industrial signals. Additionally, it offers dual-channel heating and cooling control, and supports valve position feedback, among other capabilities.

For detailed information, please request the product documentation.

Detailed Parameters

Control Cycle	50mS/100mS
Measurement Accuracy	0.001FS (using 24-bit AD)
Sampling Rate	20Hz/10Hz
Control Output
Analog Signals	12 BIT (True DA) 4-20mA, 0-20mA, 0-10mA, 0-10V, 2-10V, 0-5V, 1-5V
Relay	2A (250V AC)
Solid State Relay (Transistor)	22V 20mA
Thyristor	3A 250V AC
Display Method	IPS TFT True Color LCD
Signal Measurement Input Impedance	Voltage ≥500KΩ (5V, 10V ≥100KΩ), Current ≤60Ω, Thermocouple ≥500KΩ Resistance measurement adopt three-wire system, with each signal transmission wire resistance not exceeding 10 ohms 8.1 Standard MODBUS RTU communication protocol, two-wire RS485
Parity Check	No check, Odd check, Even check
Communication Speed	4800BPS, 9600BPS, 19200BPS, 38400BPS, 57600BPS
Communication Address Range	1~247 8.2 Standard MODBUS TCP protocol
Communication Address	0-255
Subnet Mask	0-255
Gateway	0-255
Power Supply	86~260V AC (47~63HZ)
Isolation Voltage	2300V AC for 1 minute between input, output and power supply
Operating Temperature	0~50℃
Storage Conditions	Temperature -40℃~80℃; Humidity 0.1-0.9RH
EMC Standard	EN61326*
Executive Standard	IEC60950-1
Protection Class	IP66
Power Consumption	12W

Product Features

Full-screen OVERVIEW display technology, with full 5-digit data to monitor each process control parameter, displaying ±99999.

Dual MODBUS RTU communication, optional MODBUS TCP Ethernet. Supports communication data synchronization function, with automatic SV synchronization during multi-machine operation. Enables synchronous control of multiple control instruments' data.

Realizes communication-based digital PID control, directly controlling one or multiple digital power control instruments, achieving full digital control.

Communication data supports 16-bit integer standard. When the data range exceeds 16 bits, an offset address method is used to realize 32-bit data reading and writing, achieving high-precision full-resolution real reading of process control.

24-bit high-speed multi-channel synchronous data acquisition, 32-bit RISC instruction set industrial-grade microprocessor, with strong anti-interference capability and fast response.

Control output refresh rate of 50MS, adapting to faster control processes.

4 channels of hard contact alarm output and program control output. 9 channels of programmable DIO input and output functions, with each IO customizable as input or output according to needs.

Supports dual-sensor high-low temperature switching function and redundancy switching function, automatically switching to the backup channel when a sensor fails.

Dual-channel mathematical calculation function, capable of implementing complex algorithm logic.

20 curves, with 50 segments per curve. Supports in-segment cycling and program curve cycling.

Program curves can control arbitrary timed output of 9 channels. Integrates fixed time scale function output mode and program curve time scale function, with flexible configuration as needed. Supports rate curve mode and classic time mode curve input functions.

10 groups of grouped PID and 10 groups of grouped output limiting control, meeting the requirements of various control working conditions.

Supports analog setting and digital remote setting functions.

47 types of industrial standard sensor signal inputs. Supports non-standard signal input and multi-point linearization processing.

Model Selection Dimensions

DK29H8TS: 96×48×130mm (mounting hole size 92×44mm)

Hot Tags: 50-segment programming multi-functional process controller, China 50-segment programming multi-functional process controller manufacturers, suppliers, factory