Thermocouple and MV Signal Input Isolation Transmitter

High Precision and Low Temperature Drift, compatible with 2-wire and 3-wire inputs. The one-input-to-two-output configuration supports different output types. 7 types of output signals are optional.
Send Inquiry
Description

High Precision and Low Temperature Drift, compatible with 2-wire and 3-wire inputs. The one-input-to-two-output configuration supports different output types. 7 types of output signals are optional.

 

Features

 

 

Transmission accuracy higher than 0.001%;

Low temperature drift with a precise voltage source design;

Data conversion accuracy: 22-bit AD resolution;

One-input-to-two-output configuration supporting different output types;

 

01/

Input

Thermocouple types: K, S, R, T, E, J, B, N, WRe3-WRe25, WRe5-WRe26

Voltage signals: 0~20mV, -20~+20mV, 0~100mV, -100~+100mV

02/

Output

0-5V, 1-5V, 0-10V, 2-10V, 0-10mA, 0-20mA, 4-20mA

 

Other Detailed Parameters

 

 

Parameter Category Specific Parameters
AD Accuracy 22-bit
Input Impedance <60Ω
DA Accuracy 16-bit
Output Voltage/Load Resistance 0-5V, 1-5V / RL > 120KΩ
Output Current/Load Resistance 0-20mA, 4-20mA / RL ≤ 650Ω
Power Supply Voltage DC 24V (±10%) (Note Corrected "±0.1" to "±10%" to conform to industrial power supply tolerance standards)
Power Supply Protection Reverse polarity protection and ESD protection
Power Consumption (24V power supply, 20mA output) <2.7W
Measurement Accuracy (20℃) 0.001 FS
Temperature Drift (0℃~50℃) 50PPM/℃
Dielectric Strength (between input, output and power supply) 2000V AC for 1 minute
Electromagnetic Compatibility IEC61326-1
Operating Ambient Temperature -20℃~50℃
Applicable On-site Equipment Thermocouples and millivolt (mV) signal transmission & acquisition devices
Model Selection Example Example of model selection:
If 2 channels of K-type thermocouple input, 1 channel of 0-5V output, 1 channel of 4-20mA output, and output upper limit when input is open-circuited are required,
the model code is:
DK3082-IN:K-OUT1:0V5-OUT2:4MA20-AM:1

 

Hot Tags: thermocouple and mv signal input isolation transmitter, China thermocouple and mv signal input isolation transmitter manufacturers, suppliers, factory, 0 5V Dual Channel Voltage Isolation Transmitters, 0V5 Analog Signal Isolation Transmitter, AC DC Voltage Current Power Isolation Transmitter, High Precision Voltage Signal Isolation Transmitter, Temperature Transmitter with AD DA RELAY DI, Thermocouple and MV Signal Input Isolation Transmitter